Free certification test prep

QUESTION 54
Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized, and you suspect it is a driver issue?

QUESTION 55
Which is the default port of IP-Winbox?

QUESTION 56
What does this simple queue do (check the image)?

QUESTION 57
Consider a wireless access point with mode=ap-bridge. What is the maximum number of concurrent clients that can connect to it?

QUESTION 58
What protocol is used to find the hardware address of a local device?

QUESTION 59
Select minimal set of software packages in RouteOS required to configuring a wireless AP

QUESTION 60
Which class of IP address has the most host addresses available by default?

QUESTION 61
What kind of users are listed in the “/user” menu?

QUESTION 62
In which situations Netinstall can not be used to install RouterOS on a RouterBOARD?

QUESTION 63
Consider the following diagram. We want to communicate from a device on LAN1 to a device on LAN2.
Assuming that all necessary configurations are already included on R2, which of the following configurations in R1 would enable this communication?

QUESTION 64
Which WLAN IEEE specification allows up to 54Mbps at 2.4GHz?

QUESTION 65
It is possible to add user-defined chains in ip firewall mangle

QUESTION 66
A client uses a RouterBOARD1000. The clock is configured in ‘/system clock’. The clock resets to default after each reboot.
Select the best solution for the problem.

QUESTION 67
The correct order for PPPOE discovery stage is

QUESTION 68
Why is it useful to set a Radio Name on the radio interface?

QUESTION 69
Which command is used to upgrade an IOS on a Cisco router?

QUESTION 70
What wireless card can we use to achieve 100 Mbps actual wireless throughput?

QUESTION 71
Why is it useful to set a Radio Name on the radio interface?

QUESTION 72
What are the two main types of access control lists (ACLs)?
Standard
IEEE
Extended
Specialized