HPE6-A75 Training & Certification Get Latest HPE ACEP Updated on Aug 21, 2022 [Q10-Q29]

Rate this post

HPE6-A75 Training & Certification Get Latest HPE ACEP Updated on Aug 21, 2022

Certification Training for HPE6-A75 Exam Dumps Test Engine

HP HPE6-A75 Exam Syllabus Topics:

Topic	Details
Topic 1	Given a scenario with an identified security issue, determine the remediation actions Given a scenario, translate the business needs of the environment into technical customer requirements
Topic 2	Given a customer scenario, explain how a specific technology or solution would meet the customer requirements Explain Remote Access architectures and how to integrate the architectures
Topic 3	Given a scenario, predict the outcome based on the changes to the security configuration Integrate components of the Aruba Mobile First Architecture
Topic 4	Explain mobility integration features and configuration concepts Given a customer scenario, choose the appropriate components that should be included on the BOM
Topic 5	Given a scenario, select the appropriate products based on the customer technical requirements Differentiate between redundancy methods, and describe the benefits of L2 and L3 clustering
Topic 6	Given a scenario, evaluate the customer requirements to identify gaps per a gap analysis Given a customer scenario, design and document the logical and physical network solutions
Topic 7	Use AirWave to monitor an Aruba Mobility Master and Mobility Controller Explain ArubaOS-Switch security features and configuration concepts

NEW QUESTION 10
An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

Noodelist

Servername

Master_ip

Cfg_lms

NEW QUESTION 11
Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

Only the attribute values of department and memberOf can be used in role mapping policies.

The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

Only the attribute value of company can be used in role mapping policies, not the other attributes.

The attribute values of department and memberOf are directly applied as ClearPass roles.

Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

NEW QUESTION 12
Refer to the exhibit.

An AD user’s department attribute is configured as *HR”. The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?

Executive

iOS Device

Vendor

Remote Employee

HR Local

NEW QUESTION 13
A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?

A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.

A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.

A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.

A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.

NEW QUESTION 14
Which is a valid policy simulation types in ClearPass? (Select three.)

Enforcement Policy

Posture token derivation

Role Mapping

Endpoint Profiler

Chained simulation

NEW QUESTION 15
Refer to the exhibit.

Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at 10.254.378.521. The interface 802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

Set an 802. l X client limit on the interfaces.

Manually add legitimate MAC addresses to the switch authorized MAC list.

Enable eavesdropping protection on the interfaces.

Enable DHCP snooping on VLAN 20.

NEW QUESTION 16
Refer to the exhibit.

When configuring a Web Login Page in ClearPass Guest, the information shown is displayed. What is the Address field value ‘securelogin.arubanetworks.com’ used for?

for ClearPass to send a TACACS+ request to the NAD

for appending to the Web Login URL, before the page name

for the client to POST the user credentials to the NAD

for ClearPass to send a RADIUS request to the NAD

for appending to the Web Login URL, after the page name.

NEW QUESTION 17
Refer to the exhibits.

The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on Al and A2?

A1 towards traffic, and A2 blocks traffic.

Both Al and A2 block traffic.

A1 blocks traffic, and A2 forwards traffic.

Both A1 and A2 forward traffic

NEW QUESTION 18
Refer to the exhibit.

An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?

ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user’s session after this time is up.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user’s session after 600 seconds.

ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user’s session after this time is up.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user’s session after 600 seconds.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user’s session will be terminated after 600 seconds.

NEW QUESTION 19
Refer to the exhibit.

Based on the Enforcement Policy configuration, when a user with Role Engineer connects to the network and the posture token assigned is Unknown, which Enforcement Profile will be applied?

EMPLOYEE_VLAN

RestrictedACL

Deny Access Profile

HR VLAN

Remote Employee ACL

NEW QUESTION 20
Refer to the exhibit.

Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?

The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.

The device will be disconnected from and reconnected to the network after Onboarding is completed.

The device’s onboard authorization request will be denied.

The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP-TLS authentication is performed.

After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.

NEW QUESTION 21
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)

The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.

A new Virtual IP address should be created for each NAD.

Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The NAD should be configured with the Virtual IP address for RADIUS authentications on the 802.1x network.

NEW QUESTION 22
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?

User role

Firewall policy

AAA policy

802.1X policy

NEW QUESTION 23
Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?

Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.

Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.

Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.

Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.

NEW QUESTION 24
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?

show switches

show lc-cluster group-membership

show aaa cluster essid

show ap active

NEW QUESTION 25
OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.
What should the administrator do?

Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID.

Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.

Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.

Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.

NEW QUESTION 26
Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?

To send a RADIUS CoA message from the ClearPass server to the client

To disconnect the user for 30 seconds when they are in an unhealthy posture state

To blacklist the user when they are in an unhealthy posture state

To force the user to re-authenticate and run through the service flow again

To remediate the client applications and firewall do that updates can be installed

NEW QUESTION 27
An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?

in Device Setup

in Groups

in AMP Setup

in Devices

NEW QUESTION 28
An administrator needs to authenticate users connected to an ArubaOS Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users’ traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

Per-user tunneled node

Split-tunneled mode

Per-port tunneled node

VLAN tunneled mode

NEW QUESTION 29
When is it necessary to use an SNMP based Enforcement profile to send a VIAN?

When we have to assign a vlan to a wired user on a third party wired switch that doesn’t support RADIUS return attributes.

When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.

When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.

When we have to assign a VLAN to a wired user on a third party wired switch that doesn’t support RADIUS authentication.

When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.

Step by Step Guide to Prepare for HPE6-A75 Exam: https://www.pdf4test.com/HPE6-A75-dump-torrent.html

Free certification test prep

HPE6-A75 Training & Certification Get Latest HPE ACEP Updated on Aug 21, 2022 [Q10-Q29]

HP HPE6-A75 Exam Syllabus Topics:

Leave a Reply Cancel reply