Free certification test prep

QUESTION 20
An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.
What should the engineer do to complete the task?

QUESTION 21
After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.
Which setting should be changed?

QUESTION 22
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system. What Is the cause of this Issue?


Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

QUESTION 23
A technician working with a Dell EMC PowerEdge 1 take corrective action?

QUESTION 24
What is the Open Compute Project (OCP) card used for in a Dell EMC PowerEdge server?

QUESTION 25
Match each RAID level to its characteristic.

QUESTION 26
A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber What should they do to take corrective action upon checking the System Event log?
A)

B)

C)

D)

QUESTION 27
For security reasons, the Dell EMC PowerEdge server power button must be disabled. Use the System Setup Utility in the simulator to disable the power button. When you have finished using the simulator, click Next.

QUESTION 28
Which type of access is known as Firmware RACADM on a Dell EMC PowerEdge server?

QUESTION 29
What is a valid password option available from the iDRAC9 Unique ID feature?

QUESTION 30
What are key values related to systems management when deploying OpenManage Enterprise wit Dell EMC PowerEdge servers?

QUESTION 31
What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

QUESTION 32
A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials How could the technician change the iDRAC password?

QUESTION 33
You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives Which PERC model best supports this configuration?

QUESTION 34
A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in App Direct mode. What is the minimum size DIMM supported for this type of memory?

QUESTION 35
A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only “sees” 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?

QUESTION 36
Which rear disk drive option is available in a Dell EMC PowerEdge R740xd server?

QUESTION 37
What is used by the Lifecycle Controller to directly back up the server profile on a 14G Dell EMC PowerEdge server?

QUESTION 38
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?

QUESTION 39
What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?