Free certification test prep

View All NSE4_FGT-7.0 Actual Exam Questions, Answers and Explanations for Free

NSE4_FGT-7.0 Exam Free Practice Test with100% Accurate Answers

How to get prepared for the Fortinet NSE4_FGT-7.0 Certification Exam?

In this section, we will discuss the tips and resources to get ready for the Fortinet NSE4_FGT-7.0 Certification Exam. Here are the tips to get ready for the NSE 4 Network Security Professional Certification Exam.

Learn the concepts and technologies in the domain of network security. This will help you to understand the concepts and technologies in the Fortinet NSE4_FGT-7.0 Certification Exam. You can start with the Fortinet NSE4_FGT-7.0 Certification Exam study guide. Make a study plan and set the time for the Fortinet NSE4_FGT-7.0 Certification Exam. It is recommended by the NSE 4 field experts, to start with the basics and build your confidence. Make sure that you understand the question in the Fortinet NSE4_FGT-7.0 Certification Exam. You can start with the questions in the Fortinet NSE4_FGT-7. NSE4_FGT-7.0 Dumps will help you to do it. You can also start with the Unificacion defaulc, practice questions. The object of the Fortinet NSE4_FGT-7.0 Certification Exam is to ensure that you can understand the Fortinet NSE4_FGT-7.0 Certification Exam questions.

The difficulties you can face while writing the Fortinet NSE4_FGT-7.0 Certification Exam are as follows

You can face several difficulties while writing the Fortinet NSE4_FGT-7.0 Certification Exam. Here I will inform you about a few of them.

The candidate who has been working in the network security industry for a long time might not be able to pass the Fortinet NSE4_FGT-7.0 Certification Exam. The reason for this is that the network security industry is constantly evolving, and there is a constant need for new skills and techniques. This means that a candidate who has been working in the network security industry for a long time might not be able to keep up with the latest trends in the industry. Moreover, time management is an issue for many candidates. They might be unable to dedicate enough time to solve the Fortinet NSE4_FGT-7.0 Certification Exam. They have to solve their NSE 4 Exam in a very short period of time. The candidates might also be under a lot of pressure and might not be able to concentrate properly. Bit don’t worry NSE4_FGT-7.0 Dumps will be your savior. It will help you to prepare for the Fortinet NSE4_FGT-7.0 Certification Exam and will also help you to pass the exam on the first attempt. You can also use the braindumps to get a fair idea about the types of questions and their difficulty level.

The administrator creates the Fortinet NSE4_FGT-7.0 Certification Exam. The candidate may lack the required domain knowledge to answer the questions in the Fortinet NSE4_FGT-7.0 Certification Exam. He/she might have worked in network security for a long time, but he/she might not have been exposed to all the technologies used in network security. Therefore, he/she might not be able to answer all the questions in the Fortinet NSE4_FGT-7.0 Certification Exam. The candidate might not have the required computer skills to solve the Fortinet NSE4_FGT-7.0 Certification Exam. Sync all your devices to one device. You will have to answer a lot of questions related to the Fortinet NSE4_FGT-7.0 Certification Exam.

What are the Prerequisites to take the Fortinet NSE4_FGT-7.0 Certification Exam?

The Fortinet NSE4_FGT-7.0 Certification Exam is a vendor-neutral exam, and it is vendor-neutral, meaning that anyone can take it. Therefore, there are no prerequisites to take the Fortinet NSE4_FGT-7.0 Certification Exam. But as written in the NSE4_FGT-7.0 Dumps you must have six months of experience in network security and knowledge of network security tools and techniques. Buffer size is scanned for the Fortinet NSE4_FGT-7.0 Certification Exam. Rest assured that the Fortinet NSE4_FGT-7.0 Certification Exam will test your knowledge of network security.

Q67. Exhibit:

Refer to the exhibit to view the authentication rule configuration In this scenario, which statement is true?

 IP-based authentication is enabled

 Route-based authentication is enabled

 Session-based authentication is enabled.

 Policy-based authentication is enabled

Q68. View the exhibit:

Which the FortiGate handle web proxy traffic rue? (Choose two.)

 Broadcast traffic received in port1-VLAN10 will not be forwarded to port2-VLAN10.

 port-VLAN1 is the native VLAN for the port1 physical interface.

 port1-VLAN10 and port2-VLAN10 can be assigned to different VDOMs.

 Traffic between port1-VLAN1 and port2-VLAN1 is allowed by default.

Q69. Which three statements about security associations (SA) in IPsec are correct? (Choose three.)

 Phase 2 SAs are used for encrypting and decrypting the data exchanged through the tunnel.

 An SA never expires.

 A phase 1 SA is bidirectional, while a phase 2 SA is directional.

 Phase 2 SA expiration can be time-based, volume-based, or both.

 Both the phase 1 SA and phase 2 SA are bidirectional.

Q70. Which statement regarding the firewall policy authentication timeout is true?

 It is an idle timeout. The FortiGate considers a user to be “idle” if it does not see any packets coming from the user’s source IP.

 It is a hard timeout. The FortiGate removes the temporary policy for a user’s source IP address after this timer has expired.

 It is an idle timeout. The FortiGate considers a user to be “idle” if it does not see any packets coming from the user’s source MAC.

 It is a hard timeout. The FortiGate removes the temporary policy for a user’s source MAC address after this timer has expired.

Q71. Refer to the exhibit showing a debug flow output.

Which two statements about the debug flow output are correct? (Choose two.)

 The debug flow is of ICMP traffic.

 A firewall policy allowed the connection.

 A new traffic session is created.

 The default route is required to receive a reply.

Q72. Which two statements about SSL VPN between two FortiGate devices are true? (Choose two.)

 The client FortiGate requires a client certificate signed by the CA on the server FortiGate.

 The client FortiGate requires a manually added route to remote subnets.

 The client FortiGate uses the SSL VPN tunnel interface type to connect SSL VPN.

 Server FortiGate requires a CA certificate to verify the client FortiGate certificate.

Q73. Why does FortiGate Keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session?

 To allow for out-of-order packets that could arrive after the FIN/ACK packets

 To finish any inspection operations

 To remove the NAT operation

 To generate logs

TCP provides the ability for one end of a connection to terminate its output while still receiving data from the other end. This is called a half-close. FortiGate unit implements a specific timer before removing an entry in the firewall session table.

Q74. Refer to the exhibit.

Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?

 Custom permission for Network

 Read/Write permission for Log & Report

 CLI diagnostics commands permission

 Read/Write permission for Firewall

https://kb.fortinet.com/kb/documentLink.do?externalID=FD50220

Q75. A network administrator has enabled full SSL inspection and web filtering on FortiGate. When visiting any HTTPS websites, the browser reports certificate warning errors. When visiting HTTP websites, the browser does not report errors.
What is the reason for the certificate warning errors?

 The browser requires a software update.

 FortiGate does not support full SSL inspection when web filtering is enabled.

 The CA certificate set on the SSL/SSH inspection profile has not been imported into the browser.

 There are network connectivity issues.

Q76. An administrator has configured a route-based IPsec VPN between two FortiGate devices. Which statement about this IPsec VPN configuration is true?

 A phase 2 configuration is not required.

 This VPN cannot be used as part of a hub-and-spoke topology.

 A virtual IPsec interface is automatically created after the phase 1 configuration is completed.

 The IPsec firewall policies must be placed at the top of the list.

In a route-based configuration, FortiGate automatically adds a virtual interface eith the VPN name (Infrastructure Study Guide, 206)

Q77. Which two inspection modes can you use to configure a firewall policy on a profile-based next-generation firewall (NGFW)? (Choose two.)

 Proxy-based inspection

 Certificate inspection

 Flow-based inspection

 Full Content inspection

Q78. Refer to the exhibits.


The exhibits show the SSL and authentication policy (Exhibit A) and the security policy (Exhibit B) tor Facebook.
Users are given access to the Facebook web application. They can play video content hosted on Facebook but they are unable to leave reactions on videos or other types of posts.
Which part of the policy configuration must you change to resolve the issue?

 The SSL inspection needs to be a deep content inspection.

 Force access to Facebook using the HTTP service.

 Additional application signatures are required to add to the security policy.

 Add Facebook in the URL category in the security policy.

The lock logo behind Facebook_like.Button indicates that SSL Deep Inspection is Required.

Q79. Which type of logs on FortiGate record information about traffic directly to and from the FortiGate management IP addresses?

 System event logs

 Forward traffic logs

 Local traffic logs

 Security logs

Q80. How does FortiGate act when using SSL VPN in web mode?

 FortiGate acts as an FDS server.

 FortiGate acts as an HTTP reverse proxy.

 FortiGate acts as DNS server.

 FortiGate acts as router.

Q81. How do you format the FortiGate flash disk?

 Load a debug FortiOS image.

 Load the hardware test (HQIP) image.

 Execute the CLI command execute formatlogdisk.

 Select the format boot device option from the BIOS menu.

Q82. Refer to the exhibit.

Examine the intrusion prevention system (IPS) diagnostic command.
Which statement is correct If option 5 was used with the IPS diagnostic command and the outcome was a decrease in the CPU usage?

 The IPS engine was inspecting high volume of traffic.

 The IPS engine was unable to prevent an intrusion attack.

 The IPS engine was blocking all traffic.

 The IPS engine will continue to run in a normal state.

Q83. Which two types of traffic are managed only by the management VDOM? (Choose two.)

 FortiGuard web filter queries

 PKI

 Traffic shaping

 DNS

Q84. Refer to the exhibit.

The exhibit shows the IPS sensor configuration.
If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)

 The sensor will allow attackers matching the NTP.Spoofed.KoD.DoS signature.

 The sensor will block all attacks aimed at Windows servers.

 The sensor will reset all connections that match these signatures.

 The sensor will gather a packet log for all matched traffic.

Q85. Which CLI command will display sessions both from client to the proxy and from the proxy to the servers?

 diagnose wad session list

 diagnose wad session list | grep hook-pre&&hook-out

 diagnose wad session list | grep hook=pre&&hook=out

 diagnose wad session list | grep “hook=pre”&”hook=out”

Q86. Refer to the exhibit.

Which contains a Performance SLA configuration.
An administrator has configured a performance SLA on FortiGate. Which failed to generate any traffic. Why is FortiGate not generating any traffic for the performance SLA?

 Participants configured are not SD-WAN members.

 There may not be a static route to route the performance SLA traffic.

 The Ping protocol is not supported for the public servers that are configured.

 You need to turn on the Enable probe packets switch.

Q87. Which of the following are purposes of NAT traversal in IPsec? (Choose two.)

 To detect intermediary NAT devices in the tunnel path.

 To dynamically change phase 1 negotiation mode aggressive mode.

 To encapsulation ESP packets in UDP packets using port 4500.

 To force a new DH exchange with each phase 2 rekey.

Q88. Which two statements about FortiGate FSSO agentless polling mode are true? (Choose two.)

 FortiGate uses the AD server as the collector agent.

 FortiGate uses the SMB protocol to read the event viewer logs from the DCs.

 FortiGate does not support workstation check.

 FortiGate directs the collector agent to use a remote LDAP server.

Q89. A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address is dynamic. In addition, the remote peer does not support a dynamic DNS update service.
What type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work?

 Static IP Address

 Dialup User

 Dynamic DNS

 Pre-shared Key

Dialup user is used when the remote peer’s IP address is unknown. The remote peer whose IP address is unknown acts as the dialup clien and this is often the case for branch offices and mobile VPN clients that use dynamic IP address and no dynamic DNS

Q90. Examine the following web filtering log.

Which statement about the log message is true?

 The action for the category Games is set to block.

 The usage quota for the IP address 10.0.1.10 has expired

 The name of the applied web filter profile is default.

 The web site miniclip.com matches a static URL filter whose action is set to Warning.

Q91. Why does FortiGate keep TCP sessions in the session table for some seconds even after both sides (client and server) have terminated the session?

 To remove the NAT operation.

 To generate logs

 To finish any inspection operations.

 To allow for out-of-order packets that could arrive after the FIN/ACK packets.

 Loading …

NSE4_FGT-7.0 dumps Free Test Engine Verified By It Certified Experts: https://www.pdf4test.com/NSE4_FGT-7.0-dump-torrent.html