Free certification test prep

NEW QUESTION 53
Internet clients connecting to a virtual server to download a file are experiencing about 150 ms of latency and no packet loss.
Which built-in client-side TCP profile provides the highest throughput?

NEW QUESTION 54
An LTM Specialist configures two LTM devices in a high-availability pair with trusts established and device groups configured properly using network failover. After several months, the LTM Specialist notices that changes made to one LTM device do NOT cause the synchronization status to update to “changes pending,” and this device does NOT synchronize with the device group.
Which two steps should the LTM Specialist take to identify the issue? (Choose two.)

NEW QUESTION 55
An LTM Specialist notices the following error on the stdout console:
mcpd[2395]: 01070608:0: License is not operational(expired or digital signature does not match contents) Which command should be executed to verify the LTM device license?

NEW QUESTION 56
In preparation for a maintenance task, an LTM Specialist performs a “Force to Standby” on LTM device Unit 1. LTM device Unit 2 becomes active as expected. The maintenance task requires the reboot of Unit
1. Shortly after the reboot is complete, the LTM Specialist discovers that Unit 1 has become active and Unit 2 has returned to standby.
What would cause this behavior?

NEW QUESTION 57
Given the iRule:
when HTTP_REQUEST {
if {([HTTP::username] ne “”) and ([HTTP::password] ne “”) } {
log local0. “client ip [IP::remote_addr] credentials provided [HTTP::username] [HTTP::password]”} else {
pool old_application_pool
}
}
The associated virtual server has a default pool named new_application_pool.
Which functionality does the iRule provide?

NEW QUESTION 58
— Exhibit –

— Exhibit —
Refer to the exhibit.
Which step should an LTM Specialist take next to finish upgrading to HD1.3?

NEW QUESTION 59
What is the effect of an iRule error such as referencing an undefined variable?

NEW QUESTION 60
— Exhibit –

— Exhibit —
Refer to the exhibit.
An LTM Specialist is troubleshooting an issue with SSL and is receiving the error shown when connecting to the virtual server. When connecting directly to the pool member, clients do NOT receive this message, and the application functions correctly. The LTM Specialist exports the appropriate certificate and key from the pool member and imports them into the LTM device. The LTM Specialist then creates the Client SSL profile and associates it with the virtual server.
What is the issue?

NEW QUESTION 61
An HA pair of LTM devices configured in Active-Standby mode stops responding to traffic and causes an outage. The Active device becomes Standby, but the partner device stays in Standby mode instead of taking over as Active. A reboot and restart of the services brings the LTM device to Active mode for a short time, but then it goes into Standby mode again.
Which two configuration components caused this condition? (Choose two.)

NEW QUESTION 62
— Exhibit-

— Exhibit -Refer to the exhibit. A layer 2 nPath routing configuration has been deployed. A packet capture contains a client
connection packet with the following properties:
Source IP: <Virtual Server>
Destination IP: <Client A>
At which two locations could the packet capture have been taken? (Choose two.)

NEW QUESTION 63
A user is having issues with connectivity to an HTTPS virtual server. The virtual server is on the LTM device’s external vlan, and the pools associated with the virtual server are on the internal vlan. An LTM Specialist does a tcpdump on the external interface and notices that the host header is incomplete.
In which location should the LTM Specialist put a traffic analyzer to gather the most pertinent data?

NEW QUESTION 64
An LTM Specialist defines a receive string in the HTTP monitor and then assigns it to the HTTP pool. The monitor has an interval of 5 seconds and a timeout of 16 seconds.
If the receive string is NOT seen in the the HTTP payload after 20 seconds, how does the LTM device mark the monitor status?

NEW QUESTION 65
An LTM device supports two power supplies. The value of the BigDB key “platform.powersupplymonitor” is equal to enable.
Where would the error message be visible if one of the power supplies fails or is NOT plugged in?

NEW QUESTION 66
— Exhibit-


— Exhibit –
Refer to the exhibits.
When observing the AVR statistics for the HTTPS_VS, an LTM Specialist realizes that HTTP status codes are NOT being recorded.
How should the LTM Specialist modify the configuration to record the HTTP status codes?

NEW QUESTION 67
The following decoded TCPDump capture shows the trace of a failing health monitor.
00:00:13.245104 IP 10.29.29.60.51947 > 10.0.0.12.http: P 1:59(58) ack 1 win 46 <nop,nop,timestamp
2494782300 238063789> out slot1/tmm3 lis
0x0000: 4500 006e 3b19 4000 4006 ce0c 0a1d 1d3c E..n;.@.@……<
0x0010: 0a00 000c caeb 0050 8be5 aca3 dd65 e3e1 …….P…..e..
0x0020: 8018 002e 1b41 0000 0101 080a 94b3 5b5c …..A……..[
0x0030: 0e30 90ad 4745 5420 2f74 6573 745f 7061 .0..GET./test_pa
0x0040: 6765 2e68 746d 6c20 4854 5450 312e 310d ge.html.HTTP1.1.
0x0050: 0a48 6f73 743a 200d 0a43 6f6e 6e65 6374 .Host:…Connect
0x0060: 696f 6e3a 2043 6c6f 7365 0d0a 0d0a 0105 ion:.Close……
0x0070: 0100 0003 00 …..
00:00:13.245284 IP 10.0.0.12.http > 10.29.29.60.51947: . ack 59 win 362 <nop,nop,timestamp 238063789
2494782300> in slot1/tmm3 lis
0x0000 0ffd 0800 4500 00c9 6f68 4000 8006 755d ….E…oh@…u]
0x0010 0a29 0015 0a29 0103 0050 e0d6 4929 90eb .)…)…P..I)..
0x0020 6f12 d83c 8019 fab3 9b31 0000 0101 080a o..<…..1……
0x0030 0068 4e10 5240 6150 4854 5450 2f31 2e31 .hN.R@aPHTTP/1.1
0x0040 2034 3030 2042 6164 2052 6571 7565 7374 .400.Bad.Request
0x0050 0d0a 436f 6e74 656e 742d 5479 7065 3a20 ..Content-Type:.
0x0060 7465 7874 2f68 746d 6c0d 0a44 6174 653a text/html..Date:
0x0070 2054 6875 2c20 3231 204a 616e 2032 3031 .Mon,.01.Jan.201
0x0080 3020 3138 3a35 383a 3537 2047 4d54 0d0a 2.00:00:01.GMT..
0x0090 436f 6e6e 6563 7469 6f6e 3a20 636c 6f73 Connection:.clos
0x00a0 650d 0a43 6f6e 7465 6e74 2d4c 656e 6774 e..Content-Lengt
0x00b0 683a 2032 300d 0a0d 0a3c 6831 3e42 6164 h:.20….<h1>Bad
0x00c0 2052 6571 7565 7374 3c2f 6831 3e .Request</h1>
The health monitor is sending the string shown in the capture; however, the server response is NOT as expected. The correct response should be an HTML page including the string ‘SERVER IS UP’.
What is the issue?