[Aug-2023] Latest Juniper JN0-636 Certification Practice Test Questions [Q19-Q33]

Rate this post

[Aug-2023] Latest Juniper JN0-636 Certification Practice Test Questions

Verified JN0-636 Dumps Q&As – 1 Year Free & Quickly Updates

Passing the JN0-636 exam validates a candidate’s ability to configure, troubleshoot, and maintain security solutions using Juniper Networks technology. It also demonstrates their advanced knowledge of security policies, virtual private networks, intrusion prevention systems, and advanced threat prevention. Security, Professional (JNCIP-SEC) certification is recognized by many organizations globally, and candidates who pass the JN0-636 exam are highly sought after by employers looking for professionals with advanced security skills and knowledge.

Juniper JN0-636 (Security, Professional (JNCIP-SEC)) Exam is a certification exam offered by Juniper Networks, a leading provider of network security solutions. JN0-636 exam is designed to test the knowledge and skills of network security professionals who work with Juniper Networks security technologies. The JNCIP-SEC certification is a valuable asset for IT professionals who want to demonstrate their expertise in security management and implementation.

QUESTION 19
Exhibit

You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device? (Choose two.) A)

B)

C)

D)

Option A

Option B

Option C

Option D

QUESTION 20
Exhibit

You are trying to configure an IPsec tunnel between SRX Series devices in the corporate office and branch1. You have committed the configuration shown in the exhibit, but the IPsec tunnel is not establishing.
In this scenario, what would solve this problem.

Add multipoint to the st0.0 interface configuration on the branch1 device.

Change the IKE proposal-set to compatible on the branch1 and corporate devices.

Change the local identity to inet advpn on the branch1 device.

Change the IKE mode to aggressive on the branch1 and corporate devices.

QUESTION 21
Exhibit.

Referring to the exhibit, which two statements are true? (Choose two.)

The c-1 TSYS has a reservation for the security flow resource.

The c-1 TSYS can use security flow resources up to the system maximum.

The c-1 TSYS cannot use any security flow resources.

The c-1 TSYS has no reservation for the security flow resource.

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-profile-logical-system.html

QUESTION 22
You are trying to get a SSH honeypot set up on a Juniper ATP Appliance collector. The collector is running on hardware with two physical interfaces and two physical CPU cores. The honeypot feature is not working.
Which statement is true in this scenario?

The collector must have at least three physical interfaces

The collector must have at least four physical cores

The collector must have at least four physical interfaces

The collector must have at least six physical cores

QUESTION 23
You are requested to enroll an SRX Series device with Juniper ATP Cloud.
Which statement is correct in this scenario?

If a device is already enrolled in a realm and you enroll it in a new realm, the device data or configuration information is propagated to the new realm.

The only way to enroll an SRX Series device is to interact with the Juniper ATP Cloud Web portal.

When the license expires, the SRX Series device is disenrolled from Juniper ATP Cloud without a grace period

Juniper ATP Cloud uses a Junos OS op script to help you configure your SRX Series device to connect to the Juniper ATP Cloud service.

QUESTION 24
Which two statements are correct about the output shown in the exhibit? (Choose two.)

The packet is silently discarded.

The packet is part of an existing session.

The packet is part of a new session.

The packet is explicitly rejected.

QUESTION 25
Exhibit

You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit.
The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?

You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.

You must apply the firewall filter to the lo0 interface when using filter-based forwarding.

You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.

You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.

QUESTION 26
Exhibit

Which two statements are correct about the output shown in the exhibit? (Choose two.)

The packet is processed as host inbound traffic.

The packet matches the default security policy.

The packet matches a configured security policy.

The packet is processed in the first path packet flow.

QUESTION 27
You are using ATP Cloud and notice that there is a host with a high number of ETI and C&C hits sourced from the same investigation and notice that some of the events have not been automatically mitigated.
Referring to the exhibit, what is a reason for this behavior?

The C&C events are false positives.

The infected host score is globally set bellow a threat level of 5.

The infected host score is globally set above a threat level of 5.

The ETI events are false positives.

QUESTION 28
Referring to the exhibit, which two statements are true? (Choose two.)

The c-1 TSYS has a reservation for the security flow resource.

The c-1 TSYS can use security flow resources up to the system maximum.

The c-1 TSYS cannot use any security flow resources.

The c-1 TSYS has no reservation for the security flow resource.

QUESTION 29
Click the Exhibit button.

While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.
Referring to the exhibit, which action would you use to identify problem?

Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use

Verify that the connectivity association key and the connectivity association key name match on both devices

Verify that the transmission path is not replicating packets or correcting frame check sequence error packets

Verify that the interface between the two devices is up and not experiencing errors

https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show- security-mka-statistics.html

QUESTION 30
Exhibit

Referring to the exhibit, which two statements are true? (Choose two.)

The 3uspicious_Endpoint3 feed is only usable by the SRX-1 device.

You must manually create the suspicious_Endpoint3 feed in the Juniper ATP Cloud interface.

The 3uspiciou3_Endpoint3 feed is usable by any SRX Series device that is a part of the same realm as SRX-1

Juniper ATP Cloud automatically creates the 3uopi’cioua_Endpoints feed after you commit the security policy.

QUESTION 31
Exhibit

You are using traceoptions to verity NAT session information on your SRX Series device Referring to the exhibit, which two statements are correct? (Choose two.)

This packet is part of an existing session.

The SRX device is changing the source address on this packet from

This is the first packet in the session

The SRX device is changing the destination address on this packet 10.0.1 1 to 172 20.101.10.

QUESTION 32
Click the Exhibit button.

Referring to the exhibit, which three topologies are supported by Policy Enforcer? (Choose three.)

Topology 3

Topology 5

Topology 2

Topology 4

Topology 1

QUESTION 33
What is a secure key management protocol used by IPsec?

ESP

TCP

IKE

Loading …

Latest 2023 Realistic Verified JN0-636 Dumps – 100% Free JN0-636 Exam Dumps: https://www.pdf4test.com/JN0-636-dump-torrent.html

Free certification test prep

[Aug-2023] Latest Juniper JN0-636 Certification Practice Test Questions [Q19-Q33]

Leave a Reply Cancel reply