[2024] H19-402_V1.0 Actual Exam Dumps, H19-402_V1.0 Practice Test [Q152-Q175]

Rate this post

[2024] H19-402_V1.0 Actual Exam Dumps, H19-402_V1.0 Practice Test

PDF4Test H19-402_V1.0 dumps & HCSP-Presales-Data sure practice dumps

Huawei H19-402_V1.0 (HCSP-Presales-Data Center Network Planning and Design V1.0) Exam is a certification exam offered by Huawei for individuals who want to become proficient in planning and designing data center networks. H19-402_V1.0 exam is designed to test the knowledge and skills required to design and implement data center network solutions using Huawei products and technologies. H19-402_V1.0 exam is intended for professionals who work in the presales or technical support roles in the IT industry.

Huawei H19-402_V1.0 Exam is a globally recognized certification that demonstrates the candidate’s proficiency in data center network planning and design. Candidates who pass the exam are awarded the Huawei Certified Pre-sales Specialist – Data Center Network Planning and Design certification, which is a valuable asset in the IT industry. HCSP-Presales-Data Center Network Planning and Design V1.0 certification demonstrates the candidate’s ability to design and plan data center networks that meet the requirements of customers and businesses, and it is highly valued by employers worldwide.

NEW QUESTION 152
Huawei FusionModule2000 installation scenario minimum floor height 2.6m.

True

False

NEW QUESTION 153
Channel delivery authorization B2 means that all CSPs at or above the certification level can deliver

True

False

NEW QUESTION 154
Which of the following is the name of the controller that controls the skylight of Fusionmodule2000?

AC Actuator

Access Control Actuator

Sunroof actuator

NEW QUESTION 155
What type of computer room is physically isolated from the power distribution room? (Multiple choice)

A.D.

NEW QUESTION 156
UPS5000-E has strong load adaptability, and how much capacitive/inductive load/hysteresis can be applied without derating?

0.7

0.4

0.6

0.5

NEW QUESTION 157
Why do Fusionlodule500&FusionModule800 generally recommend typical configuration solutions to customers? (Multiple choice)

The existing typical configuration scheme can basically cover most small computer room usage scenarios

Typical solutions are more competitive

Typical configuration solutions have shorter delivery cycles than customized solutions

Typical configuration solutions are more commercially viable than customized solutions

NEW QUESTION 158
UPS5000-E (50kVA power module) can accommodate up to 300kVA in a single rack.

True

False

NEW QUESTION 159
The battery can be placed outside the Fusionmodule2000 micro module.

True

False

NEW QUESTION 160
Which of the following are optional accessories for UPS5000-A-400/500K? (Multiple choice)

Battery temperature sensor

Battery inspection instrument

Dry contact expansion board

Top air outlet assembly

NEW QUESTION 161
The NetEco6000 management system can provide energy efficiency management functions. Which of the following functions does it support? (Multiple choice)

You can monitor the PUE of the computer room to understand the current energy efficiency level

You can understand the energy expenditure cost of the computer room based on the tiered electricity price of the computer room

The pPUE of each micromodule can be monitored to understand the energy efficiency level of each micromodule

Generate a power consumption report for each cabinet, which is convenient for customers to count the power consumption of each department

NEW QUESTION 162
What are the certifications for FusionModule500 & FusionModule800? (Multiple choice)

Air conditioner: CCC/CE/REACH/ROHS

Integrated cabinet: CE/REACH/ROHS

Air conditioner: REACH/ROHS

Integrated cabinet: CE/CCC/ROHS

NEW QUESTION 163
UPS2000 single shutdown sequence:

Perform “shutdown operation” on UPS. uPS turn off the inverter output and switches to bypass working mode.

Disconnect the external battery circuit breaker (operate when there is a circuit breaker in the battery circuit) or the battery connection cable

Turn off the load

Disconnect the main AC input circuit breaker and bypass AC input circuit breaker of the UPS, and disconnect the output circuit breaker. All indicators go out, the fan stops running, the UPS stops working, and the load is powered off.

NEW QUESTION 164
When the distance between the outdoor unit and the seaside is 0.5km~3.7km, which of the following outdoor unit is required?

Category d

Category a

Class c

Category b

NEW QUESTION 165
In which of the following areas is the AHU solution least effective?

***

Beijing

Harbin

Hainan

NEW QUESTION 166
The FusionModule1000AV2R3 version IT solution comes standard with cabinet spring vibration reduction device.

True

False

NEW QUESTION 167
When configuring temperature control products, if the temperature at the project site is -10-30 degrees Celsius, which of the following working conditions should be preferred?

Wide temperature range (-40-55 degrees Celsius)

T1 (-20-45 degrees Celsius)

T3 (-20-55 degrees Celsius)

Ultra-low temperature (-40-45 degrees Celsius)

NEW QUESTION 168
High rate batteries have advantages in short-term discharge conditions, and can discharge up to
90%

True

False

NEW QUESTION 169
Lithium battery supports wall installation.

True

False

NEW QUESTION 170
Which of the following models has the widest input voltage range and is more adaptable to harsh power grids?

APC Galaxy7000

UPS5000-A

Emerson NXF

Eaton 9395

NEW QUESTION 171
When competing with competitors, which of the following is correct? (Multiple choice)

Schneider can implement CPU-level energy consumption monitoring, but CPU energy consumption does not represent the energy consumption of the entire device, so monitoring is not very meaningful.
Huawei can monitor the energy consumption of each device through rPDU, but does not monitor the CPU.

Schneider uses CFD simulation to monitor temperature. However, the CFD software simulation technology used by Schneider is used to predict incompressible fluids. It is only accurate when the pressure difference is less than 5%. It is not suitable for data centers. The temperature cloud map provided by Huawei is more accurate and real-time.

Schneider and Vertiv both have advantages in digital O&M. Huawei NetEco uses intelligent operations to defend itself against competition.

Compared with other competitors in the same industry, Huawei’s network security and A/energy saving are its top advantages.

NEW QUESTION 172
Which of the following is the correct statement about circuit breakers? (Multiple choice)

Isolating switches and circuit breakers play the same role in the system

When selecting a circuit breaker, do not consider the redundancy

Leakage protection circuit breaker is not recommended to be used at the front end of the UPS system

Circuit breakers play a dual role of isolation and protection in the system

NEW QUESTION 173
NETCOL5000-A The air conditioning humidification function may fail because of which of the following? (Multiple choice)

Low indoor temperature

Humidifier is damaged

The humidifier circuit breaker is not closed

The outdoor unit is not running

NEW QUESTION 174
Assume that the discharge power specified in a battery specification is [email protected]@15min, and if the system requirement is 1400W. Which of the following number of battery packs is selected?

NEW QUESTION 175
What certifications does Huawei’s precision cabinet have? (Multiple choice)

Earthquake resistance

Thiel

Loading …

H19-402_V1.0 Actual Questions and Braindumps: https://www.pdf4test.com/H19-402_V1.0-dump-torrent.html

Free certification test prep

[2024] H19-402_V1.0 Actual Exam Dumps, H19-402_V1.0 Practice Test [Q152-Q175]

Leave a Reply Cancel reply