Free certification test prep

NO.51 What architectural document shows details about equipment mounting?
Response:

NO.52 An EDID truth table should contain which of the following to describe the inputs of a switcher?
(Choose all that apply.)
Response:

NO.53 You need to stream 10 channels of 96 kHz audio. You have 25 Mbps of bandwidth available. What is the highest bit depth you can use?
Response:

NO.54 When setting a delay filter, it’s useful to know that sound travels at how many feet (meters) per second at about 70 degrees Fahrenheit?
Response:

NO.55 In a proposed presentation room with a flat floor and theater-style seating, which has the greatest influence on the visibility of a projection screen?
[Conducting a Needs Assessment/Identify regulatory requirements and project certification goals] Response:

NO.56 What type of drawing is displayed below?

Response:

NO.57 You require a 16:9 screen with a height of 60 in (1,524 mm). What will the screen’s diagonal be?
Response:

NO.58 The total length of a measurement from a metric (SI) scaled drawing of 1:50 is 100 mm. What is the actual length?
Response:

NO.59 If sound transmission class measures a material’s ability to halt sound traveling through the air, how is transmission of sound resulting from impacts, such as footfalls on the floor above, quantified?
Response:

NO.60 What should be included in the AV specifications to further describe the system components?
Response:

NO.61 For a handheld vocal microphone, you might want set the input gain for at least __________.
Response:

NO.62 _________ compression is common for networked AV applications, such as streaming media and IP telephony.
Response:

NO.63 The total length of a measurement from a U.S. customary scaled drawing of 1/8 inch is 3.5 inches. What is the length of the real object?
Response:

NO.64 Which of the following are associated with sound pressure levels?
(Select all that apply.)
Response:

NO.65 Which of the following is not a recommended compressor setting for speech applications?
Response:

NO.66 If an amplifier draws 7 amperes (A) at 120 V of alternating current (VAC), without considering amplifier efficiency, what is the heat load it generates?
Response:

NO.67 Reflected sound could be:
Note: Answers to this question are not verified by our experts, please study yourself and select the appropriate answers.
Contribute: Please send the correct answers with reference text/link on [email protected] to get up to 50% cashback.
Response:

NO.68 What type of design information is found on TELCO/DATA (IT) coordination drawings?
Response: