The Realest Study Materials 350-401 Dumps Updated Aug 21, 2026 [Q62-Q83]

Rate this post

The Realest Study Materials 350-401 Dumps Updated Aug 21, 2026

LATEST 350-401 Exam Practice Material

Cisco 350-401 ENCOR certification exam is a comprehensive exam for IT professionals who are looking to validate their knowledge and skills in implementing Cisco Enterprise Network Core Technologies. 350-401 exam covers a range of topics related to network infrastructure, security, automation, and virtualization. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification is designed to provide professionals with the skills and knowledge they need to design, deploy, and manage complex network solutions.

Q62. Refer to the exhibit.

An engineer reconfigures the pot-channel between SW1 and SW2 from an access port to a trunk and immediately notices this error in SW1’s log.
Which command set resolves this error?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q63. Refer to the exhibit.

Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning-tree port-priority 32 command on G0/1 on SW2, but the port remains blocked.
Which command should be entered on the ports that are connected to Link2 to resolve the issue?

Enter spanning-tree port-priority 4 on SW2.

Enter spanning-tree port-priority 32 on SW1.

Enter spanning-tree port-priority 224 on SW1.

Enter spanning-tree port-priority 64 on SW2.

Q64. Drag and drop the automation characteristics from the left onto the corresponding tools on the right. Not all options are used.

Explanation:

Q65. An engineer configures a WLAN with fast transition enabled Some legacy clients fail to connect to this WLAN Which feature allows the legacy clients to connect while still allowing other clients to use fast transition based on then OLTIs?

over the DS

adaptive R

802.11V

802.11k

Q66.

See the solution below in Explanation:
Explanation:
Solution:
R22
config t
int tunn0
vrf forwarding FINANCE
ip add 10.11.22.2 255.255.255.0
tunn so e0/0
tunn dest 209.165.200.230
no shut
int et0/1
vrf forward FINANCE
ip add 10.22.22.1 255.255.255.252
no shut
ip route vrf FINANCE 10.10.111.0 255.255.255.0 tunn0
wr

Q67. In a fabric-enabled wireless network, which device is responsible for maintaining the endpoint ID database?

fabric border node

fabric edge node

fabric wireless controller

control plane node

Q68. Drag and drop the snippets onto the blanks within the code to create an EEM script that adds an entry to a locally stored text file with a timestamp when a configuration change is made. Not all options are used.

Explanation:

Q69. Which three methods does Cisco DNA Centre use to discover devices? (Choose three)

CDP

SNMP

LLDP

ping

NETCONF

a specified range of IP addresses

Q70. What are two reasons why broadcast radiation is caused in the virtual machine environment? (Choose two.)

vSwitch must interrupt the server CPU to process the broadcast packet.

The Layer 2 domain can be large in virtual machine environments.

Virtual machines communicate primarily through broadcast mode.

Communication between vSwitch and network switch is broadcast based.

Communication between vSwitch and network switch is multicast based.

Explanation
Broadcast radiation is the accumulation of broadcast and multicast traffic on a computer network. Extreme amounts of broadcast traffic constitute a broadcast storm.
The amount of broadcast traffic you should see within a broadcast domain is directly proportional to the size of the broadcast domain. Therefore if the layer 2 domain in virtual machine environment is too large, broadcast radiation may occur -> VLANs should be used to reduce broadcast radiation.
Also if virtual machines communicate via broadcast too much, broadcast
radiation may occur.
Another reason for broadcast radiation is using a trunk (to extend VLANs) from the network switch to the physical server.
Note about the structure of virtualization in a hypervisor:
Hypervisors provide virtual switch (vSwitch) that Virtual Machines (VMs) use to communicate with other VMs on the same host. The vSwitch may also be connected to the host’s physical NIC to allow VMs to get layer 2 access to the outside world.
Each VM is provided with a virtual NIC (vNIC) that is connected to the
virtual switch. Multiple vNICs can connect to a single vSwitch, allowing VMs on a physical host to communicate with one another at layer 2 without having to go out to a physical switch.

Although vSwitch does not run Spanning-tree protocol but vSwitch
implements other loop prevention mechanisms. For example, a
frame that enters from one VMNIC is not going to go out of the
physical host from a different VMNIC card.

Q71. Refer to the exhibit.

What does the output confirm about the switch’s spanning tree configuration?

The spanning-tree mode stp ieee command was entered on this switch

The spanning-tree operation mode for this switch is PVST.

The spanning-tree operation mode for this switch is PVST+.

The spanning-tree operation mode for this switch is IEEE

Explanation
The default spanning-tree mode in Cisco switch is PVST+. This spanning-tree mode is based on the IEEE
802.1D standard and Cisco proprietary extensions. PVST+ is same as standard IEEE 802.1D but it runs on each VLAN. In the output we see the line “Spanning tree enabled protocol ieee” under “VLAN 20” so it can say the switch is running in PVST+ mode.

Q72. Refer to me exhibit.

Refer to the exhibit Drag and drop the snippets into the RESTCONF request to form the request that returns this response Not all options are used

Q73.

Refer to the exhibit. What is output by this code?

012345

(0.5)

01234

Q74.

Refer to the exhibit. What is achieved by this Python script?

It displays the output from show lldp neighbors into a standard output.

It reads the neighbor count from show lldp neighbors into a dictionary list.

It displays the Layer 3 neighbors from show lldp neighbors on the terminal screen.

It reads the output from show lldp neighbors into an array object.

Q75. Drag and drop the automation characteristics from the left onto the corresponding tools on the right.

Explanation:
ChefRuby syntax in configuration filesAnsibleall functions are performed over ssh YAML configuration language Based on Python

Q76. Refer to the exhibit.

R2 is the neighboring router of R1. R2 receives an advertisement for network 192 168.10.50/32. Which configuration should be applied for the subnet to be advertised with the original /24 netmask?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q77.

Refer to the exhibit. An engineer attempts to create a configuration to allow the Blue VRF to leak into the global routing table, but the configuration does not function as expected. Which action resolves this issue?

Change the access-list destination mask to a wildcard.

Change the source network that Is specified in access-list 101.

Change the route-map configuration to VRF_BLUE.

Change the access-list number in the route map

The correct action is to change the access-list number in the route map to match the access-list defined for the VRF leaking. The access-list number is a reference that must correspond between the route-map and the access-list configuration. References: Implementing and Operating Cisco Service Provider Network Core Technologies source book

Q78. Refer the exhibit.

Which router is the designated router on the segment 192.168.0.0/24?

This segment has no designated router because it is a nonbroadcast network type.

This segment has no designated router because it is a p2p network type.

Router Chicago because it has a lower router ID

Router NewYork because it has a higher router ID

Q79. An engineer must configure a new loopback interface on a router and advertise the interface as a
/24 in OSPF. Which command set accomplishes this task?

R2(config-router)#network 172.22.2.0 0.0.0.255 area 0
R2(config)#interface Loopback0
R2(config-if)#ip address 172.22.2.1 255.255.255.0
R2(config-if)#ip ospf 100 area 0

R2(config)#interface Loopback0
R2(config-if)#ip address 172.22.2.1 255.255.255.0
R2(config-if)#ip ospf network point-to-point
R2(config-if)#ip ospf 100 area 0

R2(config)#interface Loopback0
R2(config-if)#ip address 172.22.2.1 255.255.255.0
R2(config-if)#ip ospf network point-to-multipoint
R2(config-if)#router ospf 100

R2(config)#interface Loopback0
R2(config-if)#ip address 172.22.2.1 255.255.255.0
R2(config-if)#ip ospf network broadcast
R2(config-if)#ip ospf 100 area 0

Although the configured loopback address is 172.22.2.1/24 but by default OSPF will advertise this route to loopback0 as 172.22.2.1/32 (most specific route to that loopback). In order to override this, we have to change the network type to point-to-point. After this OSPF will advertise the address to loopback as 172.22.2.0/24.

Q80. Drag and drop the descriptions from the left onto the QoS components on the right.

Explanation

The cool thing about shaping is that all traffic will be sent since we are buffering it. The downside of buffering traffic is that it introduces delay and jitter. Let me show you an example:

Q81. Which two security features are available when implementing NTP? (Choose two )

symmetric server passwords

dock offset authentication

broadcast association mode

encrypted authentication mechanism

access list-based restriction scheme

The time kept on a machine is a critical resource and it is strongly recommend that you use the security features of NTP to avoid the accidental or malicious setting of incorrect time. The two security features available are an access list-based restriction scheme and an encrypted authentication mechanism.
Reference:
https://www.cisco.com/c/en/us/support/docs/availability/high-availability/19643-ntpm.html

Q82. An administrator is configuring NETCONF using the following XML string. What must the administrator end the request with?

</rpc>]]>]]>

</rpc-reply>

</rpc>

Q83. Which action is a function of VTEP in VXLAN?

tunneling traffic from IPv6 to IPv4 VXLANs

allowing encrypted communication on the local VXLAN Ethernet segment

encapsulating and de-encapsulating VXLAN Ethernet frames

tunneling traffic from IPv4 to IPv6 VXLANs

VTEPs connect between Overlay and Underlay network and they are responsible for encapsulating frame into VXLAN packets to send across IP network (Underlay) then decapsulating when the packets leaves the VXLAN tunnel. VTEPs connect between Overlay and Underlay network and they are responsible for encapsulating frame into VXLAN packets to send across IP network (Underlay) then decapsulating when the packets leaves the VXLAN tunnel.

Loading …

Cisco 350-401 ENCOR exam is a challenging test that requires a solid understanding of enterprise-level networking concepts and technologies. 350-401 exam consists of 90-110 multiple-choice and simulation questions that cover a broad range of topics, including network infrastructure, virtualization, network assurance, security, automation, and programmability. Candidates are expected to have hands-on experience with Cisco enterprise network technologies and tools, such as Cisco DNA Center, Cisco SD-WAN, and Cisco ISE. To prepare for 350-401 exam, candidates can attend Cisco training courses, use Cisco learning materials, and practice with hands-on labs and simulations.

Study HIGH Quality 350-401 Free Study Guides and Exams Tutorials: https://www.pdf4test.com/350-401-dump-torrent.html

Free certification test prep

The Realest Study Materials 350-401 Dumps Updated Aug 21, 2026 [Q62-Q83]

Leave a Reply Cancel reply