Pass Network Appliance NS0-164 Exam Quickly With PDF4Test [Q135-Q158]

Rate this post

Pass Network Appliance NS0-164 Exam Quickly With PDF4Test

Prepare NS0-164 Question Answers – NS0-164 Exam Dumps

Network Appliance NS0-164 Exam Syllabus Topics:

Section	Objectives
Topic 1: Storage Platforms	– Software-defined on-premises or cloud storage systems – Physical storage systems – Upgrading or scaling ONTAP clusters
Topic 2: Data Protection	– Troubleshoot DP solutions – ONTAP data protection solutions – ONTAP business continuity concepts
Topic 3: Security	– Protocol security – In-flight and at-rest encryption – Anti-ransomware concepts – Security hardening
Topic 4: Performance	– Troubleshoot storage system performance – ONTAP performance monitoring
Topic 5: ONTAP Storage	– Logical storage features – NetApp storage efficiency features
Topic 6: Networking	– Network components – Troubleshoot network components
Topic 7: Core ONTAP	– Storage Virtual Machine (SVM) management – High availability concepts – ONTAP system management
Topic 8: Storage Protocols and Connectivity	– Troubleshoot NAS solutions – NAS solutions – Troubleshoot SAN solutions – ONTAP S3 solutions – SAN solutions

NEW QUESTION 135
Which two conditions would prevent an ONTAP upgrade? (Choose two.)

Established iSCSI sessions

Offline volume

Failed disk

Offline LIF

Established NFS sessions

NEW QUESTION 136
In the NetApp Product line, what makes the AFF Platform unique?

It can only use spinning disks (HDD)

It can only use secure digital (SD) cards.

It can use both spinning and solid state disks (HDD & SSD)

It can only use solid state disks (SSD)

NEW QUESTION 137
In a synchronous SnapMirror configuration, the source storage appliance exhibits high latency due to user traffic and rapid data change from SnapMirror transactions. Which one of the following tuning methods best resolves this performance behavior? Edit the /etc/snapmirror.conf file on the destination storage appliance and set:

outstanding=3s

visibility_interval=3s

cksum=3s

src con=3

NEW QUESTION 138
Which native ONTAP feature allows an administrator to block a Windows user from writing files with the.crypto extension?

FPolicy

Kerberos

IP-SEC

FIPS

NEW QUESTION 139
You have determined that the failure to a MetroChister is a disaster.
Which step should you take?

Ensure the surviving node is isolated from its partner.

Force the surviving node to take over the functions of its partner.

Remount the failed partners volume.

All of the above

NEW QUESTION 140
Which pair of components is a major part of data storage VMs?

aggregates and network ports.

disks and nodes.

data LIFs and aggregates.

volumes and data LIFs.

NEW QUESTION 141
An administrator wants to scale out storage performance for real time read-intensive workloads across multiple controllers.
Which two NetApp ONTAP features accomplish this task? (Choose two.)

FlexCache

FlexGroup

FlexVol

FlexClone

NEW QUESTION 142
Normally, before you split a SyncMirror volume, you ensure that both plexes are

plexes, pools

online, operational

offline, operational

snapshots, contain the most recent snapshot

NEW QUESTION 143
Which two modes support using SnapMirror over multiple paths?

Multiplexing

Failover

Giveback

Standalone

NEW QUESTION 144
Which two statements are true about ONTAP? (Choose two).

ONTAP supports scalability with additional storage drives and controllers.

ONTAP can only be deployed on specific architectures.

ONTAP supports a limited set of application.

ONTAP offers flexible options such as SSDs, HDDs, and public clouds.

NEW QUESTION 145
Which NetApp SnapMirror method allows for transparent failover between two AFF clusters with applications using iSCSI LUNs?

SM BC

SnapVault

SVM-DR

SM_S

NEW QUESTION 146
In a fabric-attached MetroCluster, hardware disk ownership by a node is determined by which two factors (Choose two.)

the system ID of the controller

what types of ports are on the HBA

the location of the HBA or onboard port

what types of disks are used in the cluster

how the disks are configured by the administrator

which switch ports the controller and disks are connected to

NEW QUESTION 147
For each Open Systems platform directory to be backed up to the SnapVault secondary storage system, you must execute _____ from the primary to secondary storage system.

a temporary copy

an incremental copy

a scheduled update copy

an initial baseline copy

NEW QUESTION 148
What is a Snapshot copy in NetApp data protection solutions?

compressed image of a volume.

scalable image of a volume.

read-only, point-in-time image of a volume.

writable image of a volume.

NEW QUESTION 149
An administrator Is troubleshooting failed cluster peering between three ONTAP clusters for cascaded SnapMirror replication. Cluster1 is peered to Cluster, cluster^ is peered to Cluster3.
Cluster1 and Cluster3 do not have an available route to reach each other. Cluster2 can route to both Cluster1 and Cluster3 using dedicated and separate intercluster LIFs.
What ONTAP network component must be configured on Cluster2 to resolve this issue?

IPspaces

Broadcast domains

Failover groups

Subnets

NEW QUESTION 150
The snapvault snap sched-x command can be used to:

Schedule full backups

Start initial backups

Schedule incremental backups

Specify platforms that can be backed up

NEW QUESTION 151
What are three functions of SnapMirror Asynchronous? (Choose three).

provide synchronous disaster recovery.

copy the Snapshot copies to a destination volume, usually on another cluster.

periodically create NetApp Snapshot copies of data on one volume.

provide quick availability and restore operation of data from the time of the latest Snapshot copy.

NEW QUESTION 152
An administrator has an ESXi cluster with VMware VMFS LUNs on an AFF system. Alter troubleshooting performance issues, the administrator determines that timeout best practices are not set on the hosts.
Which NetApp tool would apply the best practice settings?

SnapCenter Plug-in for VMware vSphere

SAN Host Utilities

SnapManager

ONTAP Tools for vSphere

NEW QUESTION 153
What is the minimum number of HA pairs required for Epsilon to be automatically assigned?

NEW QUESTION 154
What is the definition of an interface group?

a group of physical network interfaces that combine to create a single LIF with higher bandwidth and redundancy.

a type of network protocol that is used to transfer data between devices on a LAN.

a type of software that aneblaes users to access and manage network resources from a centralized location.

a security feature that allows access control to network resources based on user indentity.

NEW QUESTION 155
Fill in the blanks for the following statement:
The qtree specified for_____must not exist on the secondary system before you run the_____command.

sec_qtree_path. snapvault start

pri_qtree_path. snapvault start

sec_qtree_path. snapvault enable

pri_qtree_path. snapvault enable

NEW QUESTION 156
Which items are modes of the volume automatic resize feature? (Choose three).

off.

grow.

shrink.

grow_shrink.

NEW QUESTION 157
Refer to the exhibit.

An administrator creates a new qtree and an associated export policy. When the client tries to connect, they are denied.
What should the administrator do?

Update the superuser entry lo “any” in the volume export-policy

Replace the IP with the client hostname in the qtree export policy

Add the new host IP with at least read access to the volume export-policy

Add a new rule in the qtree export policy in allow read-write access for the new host

NEW QUESTION 158
The required hardware to add SyncMirror to an existing system would be ___________.

disk shelves and cluster interconnect

disk shelves and termination switches

disk shelves, Ethernet adapters, and cabling

disk shelves, Fibre Channel adapters, and cabling

Loading …

Real Network Appliance NS0-164 Exam Questions [Updated 2026]: https://www.pdf4test.com/NS0-164-dump-torrent.html

Free certification test prep

Pass Network Appliance NS0-164 Exam Quickly With PDF4Test [Q135-Q158]

Network Appliance NS0-164 Exam Syllabus Topics:

Leave a Reply Cancel reply