Get Real NSE4_FGT_AD-7.6 Exam Dumps [Oct-2026] Practice Tests [Q28-Q49]

Rate this post

Get Real NSE4_FGT_AD-7.6 Exam Dumps [Oct-2026] Practice Tests

Last NSE4_FGT_AD-7.6 practice test reviews: Practice Test Fortinet dumps

Fortinet NSE4_FGT_AD-7.6 Exam Overview:

Certification Vendor:	Fortinet
Exam Name:	Fortinet NSE 4 – FortiOS 7.6 Administrator
Exam Number:	NSE4_FGT_AD-7.6
Certificate Validity Period:	3 years
Passing Score:	Pass/Fail (approx. 70% standard)
Exam Duration:	90 minutes
Exam Format:	Multiple choice, Applied configuration & troubleshooting, Scenario-based questions
Exam Price:	$200 USD
Real Exam Qty:	50–55
Related Certifications:	FCP in Cloud Security FCP in Secure Networking FCP in Security Operations FCP in SASE
Available Languages:	Spanish, Japanese, English, Brazilian Portuguese, French, Korean
Recommended Training:	FortiOS 7.6 Administrator Self-Paced Course
Exam Registration:	Pearson VUE Registration
Sample Questions:	Fortinet NSE4_FGT_AD-7.6 Sample Questions
Exam Way:	Proctored online or onsite via Pearson VUE
Pre Condition:	No formal prerequisites; recommended: basic networking knowledge, hands-on FortiGate experience, FortiGate Operator & Administrator training
Official Syllabus URL:	https://training.fortinet.com/local/staticpage/view.php?page=nse4_fgt_ad_7_6

NEW QUESTION 28
What are two characteristics of HA cluster heartbeat IP addresses in a FortiGate device?
(Choose two.)

Heartbeat interfaces have virtual IP addresses that are manually assigned.

Heartbeat IP addresses are used to distinguish between cluster members.

The heartbeat interface of the primary device in the cluster is always assigned IP address
169.254.0.1.

A change in the heartbeat IP address happens when a FortiGate device joins or leaves the cluster.

NEW QUESTION 29
Refer to the exhibit.

A partial cloud topology is shown.
You deployed a FortiGate Cloud-Native Firewall (CNF) in AWS for FortiGate CNF policy enforcement for EC2 instance traffic. Which path does the EC2 traffic take from the EC2 instance to the internet?

EC2 instance # GWLBe # FortiGate CNF # GWLBe # IGW # internet

EC2 instance # Internet Gateway (IGW) # Gateway Load Balancer (GWLB) # FortiGate CNF # internet

EC2 instance # FortiGate CNF # GWLB # GWLBe # IGW # internet

EC2 instance # GWLB endpoint (GWLBe) # FortiGate CNF # IGW # internet

NEW QUESTION 30
What are two features of FortiGate FSSO agentless polling mode? (Choose two.)

FortiGate directs the collector agent to use a remote LDAP server.

FortiGate uses the SMB protocol to read the event viewer logs from the DCs.

FortiGate does not support workstation check.

FortiGate uses the AD server as the collector agent.

NEW QUESTION 31
You have implemented the application sensor and the corresponding firewall policy as shown in the exhibits.

You cannot access any of the Google applications, but you are able to access www.fortinet.com .
What would you do to resolve this issue?

Change the Inspection mode to Proxy-based.

Set SSL inspection to deep-content-inspection.

Move up Google in the Application and Filter Overrides section to set its priority to 1.

Add Google .com to the URL category in the security profile.

NEW QUESTION 32
Refer to the exhibit.

Why did the FortiGate device drop the packet?

It matched the default implicit firewall policy.

It failed the RPF check.

It matched an explicitly configured firewall policy with the action DENY.

It cannot reach the next-hop IP.

NEW QUESTION 33
Exhibits:

You are asked to implement an antivirus profile for files downloaded through FTP, HTTP, and HTTPS.
While testing, you are successful with HTTP and FTP protocols, but FortiGate does not block the file download over HTTPS.
What could be the cause?

The feature set in the antivirus profile is not set to Flow-based.

Web filter is not enabled on the firewall policy to complement the antivirus profile.

The action on the firewall policy is not set to deny.

The SSL inspection mode in the firewall policy is not deep content inspection.

“To perform SSL inspection on traffic flowing through the FortiGate device, you must allow the traffic with a firewall policy and apply an SSL inspection profile to the policy. Note that an SSL inspection profile alone will not trigger a security inspection. You must combine it with other security profiles like Antivirus, Web Filter, Application Control, or IPS.”
“By default, firewall policies are set with the no-inspection SSL profile. Therefore, any encrypted traffic flows through uninspected… For antivirus or IPS control, you should use a deep-inspection profile.”
“When you use deep inspection, FortiGate impersonates the recipient of the originating SSL session, and then decrypts and inspects the content to find threats and block them. It then re-encrypts the content and sends it to the real recipient. Deep inspection protects from attacks that use HTTPS and other commonly used SSL-encrypted protocols…” Technical Deep Dive:
The correct answer is D. HTTP and FTP are working because FortiGate can inspect those payloads directly with the antivirus profile. HTTPS is different because the traffic is encrypted. If the firewall policy uses only certificate inspection or another non-decrypting SSL mode, FortiGate can identify certificate/SNI information, but it cannot see the downloaded file contents. Without decrypting the HTTPS session, the antivirus engine never receives the payload to scan, so EICAR or other malware can pass.
Why the other options are wrong:
A is not the issue here. The exhibit shows the antivirus profile and policy are already aligned for proxy-based operation, and the failure is specific to HTTPS visibility.
B is wrong because web filter is not required for antivirus scanning.
C is wrong because firewall policies commonly use ACCEPT with security profiles; the antivirus engine can still block the file after policy match. The study guide explicitly says ACCEPT allows the session and then applies antivirus scanning and other packet-processing features.
To fix it, apply deep-inspection on the firewall policy:
config firewall policy
edit <policy-id>
set ssl-ssh-profile “deep-inspection”
set av-profile “HTTP_AV_Profile”
next
end
On real FortiGate hardware, this also has performance implications. Simple flow handling can often stay on accelerated paths, but full SSL deep inspection forces decryption and content scanning through the inspection engine, increasing CPU/WAD workload.

NEW QUESTION 34
Refer to the exhibits.

The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.
Based on the system performance output, what are the two possible outcomes? (Choose two.)

FortiGate drops new sessions.

Administrators can access FortiGate only through the console port.

Administrators can change the configuration.

FortiGate has entered conserve mode.

NEW QUESTION 35
What is the primary FortiGate election process when the HA override setting is enabled?

Connected monitored ports > Priority > HA uptime > FortiGate serial number

Connected monitored ports > Priority > System uptime > FortiGate serial number

Connected monitored ports > HA uptime > Priority > FortiGate serial number

Connected monitored ports > System uptime > Priority > FortiGate serial number

NEW QUESTION 36
An administrator must enable a DHCP server on one of the directly connected networks on FortiGate. However, the administrator is unable to complete the process on the GUI to enable the service on the interface.
In this scenario, what prevents the administrator from enabling DHCP service?

The DHCP server setting is available only on the CLI.

Another interface is configured as the only DHCP server on FortiGate.

The FortiGate model does not support the DHCP server.

The role of the interface prevents setting a DHCP server.

NEW QUESTION 37
Refer to the exhibits.

An administrator configured both members of an HA cluster at the same time. After one week of monitoring, the administrator wants to verify the HA failover performance. How can the administrator force a failover? (Choose one answer)

The administrator must reset the HA uptime on HQ-NGFW-1.

The administrator must set the parameter override to enable on HQ-NGFW-2.

The administrator must increase the HA priority on HQ-NGFW-2.

The administrator must set the monitored port1 to down on HQ-NGFW-1.

“This slide shows the order when the HA override setting is disabled, which is the default behavior.”
“1. The cluster compares the number of monitored interfaces that have a status of up. The member with the most available monitored interfaces becomes the primary.
2. The cluster compares the HA uptime of each member. The member with the highest HA uptime, by at least five minutes, becomes the primary.
3. The member with the highest priority becomes the primary.”
“When HA override is disabled, the HA uptime has precedence over the priority setting. This means that if you must manually fail over to a secondary device, you can do so by reducing the HA uptime of the primary FortiGate. You can do this by running the diagnose sys ha reset-uptime command on the primary FortiGate, which resets its HA uptime to 0.” Technical Deep Dive:
The correct answer is A.
Both HA members are configured with set override disable, so FGCP does not prefer the higher-priority unit first. With override disabled, the election order is based on monitored interfaces, then HA uptime, then priority, and finally serial number. Since the cluster has been running for one week, the secondary unit will have a much higher HA uptime than a unit whose uptime is reset to zero. Therefore, if the administrator runs diagnose sys ha reset-uptime on the current primary HQ-NGFW-1, FGCP re-evaluates election and the other member can take over.
Option B is wrong because enabling override only on HQ-NGFW-2 does not by itself force an immediate clean failover in this scenario and also changes election behavior rather than performing the documented manual failover action. Option C is wrong because with override disabled, priority does not beat HA uptime. Option D can simulate a link failover, but the study guide’s documented manual failover method for this exact override-disabled condition is to reset the primary’s HA uptime.
Relevant CLI:
diagnose sys ha reset-uptime
get system ha status
diagnose sys ha status
This is the clean exam-aligned method to trigger a controlled HA role change.

NEW QUESTION 38
Refer to the exhibit. An administrator has created a new firewall address to use as the destination for a static route. Why is the administrator not able to select the new address in the Destination field of the new static route?

In the new static route, the administrator must select Named Address.

In the new firewall address, the FQDN address must first beresolved.

In the new static route, the administrator must first set the interface to port2.

In the new firewall address, Routing configuration must be enabled.

NEW QUESTION 39
What are two characteristics of HA cluster heartbeat IP addresses in a FortiGate device?
(Choose two.)

Heartbeat interfaces have virtual IP addresses that are manually assigned.

Heartbeat IP addresses are used to distinguish between cluster members.

The heartbeat interface of the primary device in the cluster is always assigned IP address
169.254.0.1.

A change in the heartbeat IP address happens when a FortiGate device joins or leaves the cluster.

NEW QUESTION 40
You have configured an application control profile, set peer-to-peer traffic to Block under the Categories tab.
and applied it to the firewall policy. However, your peer-to-peer traffic on known ports is passing through the FortiGate without being blocked.
What FortiGate settings should you check to resolve this issue?

FortiGuard category ratings

Network Protocol Enforcement

Replacement Messages for UDP-based Applications

Application and Filter Overrides

NEW QUESTION 41
Refer to the exhibits. You have implemented the application sensor and the corresponding firewall policy as shown in the exhibits.
You cannot access any of the Google applications, but you are able to access www.fortinet.com.
What would you do to resolve this issue?

Change the Inspection mode to Proxy-based.

Set SSL inspection to deep-content-inspection.

Move up Google in the Application and Filter Overrides section to set its priority to 1.

Add *Google*.com to the URL category in the security profile.

NEW QUESTION 42
Refer to the exhibits.

FGT-1 and FGT-2 are updated with HA configuration commands shown in the exhibit.
What would be the expected outcome in the HA cluster?

FGT-2 will take over as the primary because it has the override enablesetting and higher priority than FGT-1.

FGT-1 will synchronize the override disablesetting with FGT-2.

The HA cluster will become out of sync because the overridesetting must match on all HA members.

FGT-1 will remain the primary because FGT-2 has lower priority.

NEW QUESTION 43
You are onboarding an agentless, secure web gateway (SWG) endpoint for secure internet access (SIA). What will happen to the user ‘ s nonweb traffic? (Choose one answer)

All the nonweb traffic will bypass FortiSASE.

The endpoint will use split tunneling to redirect nonweb traffic to FortiSASE.

FortiSASE will use Firewall-as-a-Service (FWaaS) to redirect nonweb traffic.

FortiSASE will use SWG to redirect nonweb traffic to FortiExtender.

NEW QUESTION 44
Refer to the exhibit.

What would be the impact of these settings on the Server certificate SNI check configuration on FortiGate?

FortiGate will accept and use the CN in the server certificate for URL filtering if the SNI does not match the CN or SAN fields.

FortiGate will accept the connection with a warning if the SNI does not match the CN or SAN fields.

FortiGate will close the connection if the SNI does not match the CN or SAN fields.

FortiGate will close the connection if the SNI does not match the CN and SAN fields

NEW QUESTION 45
Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.

Based on the exhibit, which statement is true?

The Underlay zone is the zone by default.

The Underlay zone contains no member.

port2 and port3 are not assigned to a zone.

The virtual-wan-link and overlay zones can be deleted.

NEW QUESTION 46
Refer to the exhibit.

A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 failed to come up. The administrator has also re- entered the pre-shared key on both FortiGate devices to make sure they match.
Based on the phase 1 configuration and the diagram shown in the exhibit, which two configuration changes can the administrator make to bring phase 1 up? (Choose two.)

On HQ-FortiGate, set IKE mode to Main (ID protection).

On Remote-FortiGate, set port2 as Interface.

On HQ-FortiGate, disable Diffie-Helman group 2.

On both FortiGate devices, set Dead Peer Detection to On Demand.

NEW QUESTION 47
A remote user reports slow SSL VPN performance and frequent disconnections. The user is located in an area with poor internet connectivity.
What setting should the administrator adjust to improve the user’s experience?

Enable split tunneling to reduce VPN traffic.

Change the SSL VPN port to a non-standard port.

Increase the session timeout for inactive sessions.

Configure the DTLS timeout to accommodate high-latency connections.

NEW QUESTION 48
Refer to the exhibits. A diagram of a FortiGate device connected to the network VIP object and firewall policy configurations are shown.
The WAN (port2) interface has the IP address 100.65.0.101/24.
The LAN (port4) interface has the IP address 10.0.11.254/24.
If the host 100.65.1.111sends a TCP SYN packet on port 443 to 100.65.0.200, what will the source address, destination address, and destination port of the packet be at the time FortiGate forwards the packet to the destination?

10.0.11.254, 10.0.15.50, and 4443, respectively

100.65.1.111, 10.0.11.50and 443, respectively

10.0.11.254, 100.65.0.200, and 443, respectively

100.65.1.111, 10.0.11.50, and 4443, respectively

NEW QUESTION 49
Refer to the exhibit.
A partial cloud topology is shown.

You deployed a FortiGate Cloud-Native Firewall (CNF) in AWS.
During the deployment, which components must the FortiGate CNF create to handle traffic from the EC2 instance?

The customer VPC and GWLBe

The gateway load balancer endpoint (GWLBe) in the customer virtual private cloud (VPC)

The CNF VPC. customer VPC. and GWLB

The GWLB. GWLBe, and the internet gateway (IGW) in the customer VPC

Fortinet NSE4_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	VPN: This domain focuses on implementing meshed or partially redundant IPsec VPN topologies for secure connections.
Topic 2	Routing: This domain covers configuring static routes for packet forwarding and implementing SD-WAN to load balance traffic across multiple WAN links.
Topic 3	Firewall Policies and Authentication: This domain focuses on creating firewall policies, configuring SNAT and DNAT for address translation, implementing various authentication methods, and deploying FSSO for user identification.
Topic 4	Content Inspection: This domain addresses inspecting encrypted traffic using certificates, understanding inspection modes and web filtering, configuring application control, deploying antivirus scanning modes, and implementing IPS for threat protection.
Topic 5	Deployment and System Configuration: This domain covers initial FortiGate setup, logging configuration and troubleshooting, FGCP HA cluster configuration, resource and connectivity diagnostics, FortiGate cloud deployments (CNF and VM), and FortiSASE administration with user onboarding.

Get Ready to Pass the NSE4_FGT_AD-7.6 exam with Fortinet Latest Practice Exam : https://www.pdf4test.com/NSE4_FGT_AD-7.6-dump-torrent.html

Free certification test prep