2026 Updated Fortinet NSE6_OTS_AR-7.6 Dumps PDF – Want To Pass NSE6_OTS_AR-7.6 Fast [Q72-Q90]

Rate this post

2026 Updated Fortinet NSE6_OTS_AR-7.6 Dumps PDF – Want To Pass NSE6_OTS_AR-7.6 Fast

NSE6_OTS_AR-7.6 Practice Exam Dumps – 99% Marks In Fortinet Exam

Fortinet NSE6_OTS_AR-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Monitoring and risk assessment: Covers creating event handlers in FortiAnalyzer to monitor network activity and detect threats. It also includes performing risk assessments and analyzing security reports to support ongoing risk management.
Topic 2	Network security: Explains how to apply security inspections specifically for industrial protocols and implement virtual patching to protect vulnerable systems. It also includes configuring automation to enhance threat response and operational efficiency.
Topic 3	Asset management: Covers understanding OT standards and how Fortinet aligns with compliance requirements in industrial environments. It also includes using the Fortinet Security Fabric to manage assets and implementing device detection using FortiGate and FortiNAC.
Topic 4	Network access control: Focuses on OT Ethernet fundamentals and designing secure network segmentation strategies. It also includes configuring authentication methods to control and verify access to the OT network.

Q72. Which statemenl about the IEC 104 protocol is true?

IEC 104 is used for telecontrol SCADA in electrical engineering applications.

IEC 104 is IEC 101 compliant in old SCADA systems.

IEC 104 protects data transmission between OT devices and services.

IEC 104 uses non-TCP/IP standards.

Q73. Refer to the exhibit.

A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer. When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)

You must first configure the connector.

You must first enable Extended Log Filtering in the report.

You must first enable Auto-cache in the report.

You must first configure an event handler.

You must first select Playbook Starter, and then select the newly created report.

Q74. Drag and Drop Question
Match each industrial protocol to its corresponding characteristics.
Select each OT industrial protocol in the column on the left and drag and drop it into the blank space next to its corresponding characteristics in the column on the right. After matching a device type to its characteristics, you can move it again if you want to change your answer by clicking the industrial protocol name. You must match all four industrial protocols to their characteristics in the work area.

Q75. Refer to the exhibit.

An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)

POWERLINK

Ethernet over industrial protocol

Modbus

EtherCAT

Q76. Refer to the exhibit.

A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)

Device Detection is enabled on the other identified device.

The other identified device must be authorized on the root FortiGate.

The other identified device must be authorized on FortiAnalyzer.

Device Detection is enabled on port3.

Q77. Refer to the exhibit.A new operational technology rule is being created to monitor Modbus protocol traffic on FortiSIEM.
Which action will ensure all Modbus messages on the network match the rule?

Set the Aggregate attribute value to equal to or greater than zero.

Add a new condition to filter Modbus traffic based on the Source TCP/UDP port.

This rule is valid and requires no additional changes.

Remove attributes in the Group By section that are not configured in the Filter section.

Q78. Refer to the exhibit. A partial OT network is shown. You must improve the security of this OT network and implement internal segmentation between network 1 and network 2. How can you achieve the segmentation?
(Choose one answer)

You can configure universal ZTNA.

You can configure one traffic VDOM.

You can configure an explicit software switch.

You can configure forward domain IDs for each network.

Q79. Which three common breach points can you find in a typical OT environment? (Choose three.)

Global hat

Hard hat

VLAN exploits

Black hat

RTU exploits

Q80. Refer to the exhibit. Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)

FortiGate for SD-WAN

FortiGate for application control and intrusion prevention system (IPS)

FortiNAC for network access control

FortiSIEM for security incident and event management

FortiEDR for endpoint detection

Q81. Refer to the exhibit.

You have configured event handlers on FortiAnalyzer to monitor your OT network.
Based on the partial Event Monitor page shown in the exhibit, which statement is correct?

The corresponding IPS log has a block or drop action.

The Web.Client event is contained.

The Web.Client event is unhandled.

The corresponding IPS log has a quarantine action.

Q82. What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)

Enhanced point of connection details

Direct VLAN assignment

Adapter consolidation for multi-adapter hosts

Importation and classification of hosts

Q83. Refer to the exhibit.

Based on the information provided on the partial Event Monitor page shown in the exhibit, how was the attack detected? (Choose one answer)

Automatically by a stitch

Manually by an administrator

Automatically by a playbook

Automatically by an event handler

Q84. Refer to the exhibit. An operational technology (OT) architect has implemented Modbus TCP with a simulation Conpot server to identify and control Modbus traffic in their OT network. The FortiGate-Edge device is configured with a software switch interface, SSW-01.
Based on the topology shown in the exhibit, which two statements must be true for the simulation of traffic between client and server to be successful? (Choose two.)

An IP address must be assigned to port5

In the FortiGate firewall policy, NAT must be enabled from port3 to SSW-01

The FortiGate device must be in offline intrusion detection system (IDS) mode

The FortiGate-Edge device must be in network address translation (NAT) operation mode

Q85. Refer to the exhibit, which shows a nonprotected OT environment. An administrator needs to implement appropriate protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)

Use segmentation.

Configure firewall policies with web filtering to protect the different ICS networks.

Deploy a FortiGate device within each ICS network.

Configure firewall policies with industrial protocol sensors.

Deploy an edge FortiGate between the internet and the OT network as a one-arm sniffer.

Q86. Refer to the exhibit.

The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)

You must enable Virtual Patching in the Feature Visibility section.

You must have a ruggedized FortiGate allowing the virtual patching feature.

You must enable OT signatures.

You must have a valid OT security service license.

Q87. An OT supervisor has configured LDAP and FSSO for authentication. The goal is that all users be authenticated against passive authentication first and. if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?

Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.

Enable two-factor authentication with FSSO.

Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.

Under config user settings configure set auth-on-demand implicit.

Q88. Refer to the exhibit.

A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)

You must configure a stitch on the root FortiGate.

You must configure a LOCALHOST task in the FortiAnalyzer playbook.

You must configure an intrusion prevention security profile on all FortiGate devices.

You must configure an event handler on FortiAnalyzer.

Q89. Refer to the exhibit. Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)

Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.

Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.

IT and OT networks are separated by segmentation.

FortiGate-3 and FortiGate-4 devices must be in a transparent mode.

Q90. What is the primary objective of implementing SD-WAN in operational technology (OT) networks?

Replace standard links with lower cost connections

Enhance network performance of OT applications

Reduce security risk and threat attacks

Remove centralized network security policies.

Updated Verified NSE6_OTS_AR-7.6 Q&As – Pass Guarantee: https://www.pdf4test.com/NSE6_OTS_AR-7.6-dump-torrent.html

Free certification test prep

2026 Updated Fortinet NSE6_OTS_AR-7.6 Dumps PDF – Want To Pass NSE6_OTS_AR-7.6 Fast [Q72-Q90]

Fortinet NSE6_OTS_AR-7.6 Exam Syllabus Topics:

Leave a Reply Cancel reply