LEED-AP-BD-C Practice Exam and Study Guides – Verified By PDF4Test Updated 407 Questions [Q13-Q34]

QUESTION 13
What are the Storage and Collection of Recyclables requirements for only Retail projects under the Materials and Resources Prerequisite?

Retail projects must conduct a waste stream audit for the duration of the project in an existing location or make projections based on historical data for similar establishments. Identify the top-five recyclable waste streams while stating the top-four waste streams where both collection and storage space will be provided

Retail projects must conduct a waste stream audit once a month for the project in an existing or rented location or make projections based on data gathered from a previous cycle. Identify the top-three recyclable waste streams while stating the top-two waste streams where both collection and storage space will be provided

Retail projects must conduct a waste stream audit twice a year for the project in an existing or rented location or make projections based on the previous year’s data for their business. Identify the top-four recyclable waste streams while stating the top-three waste streams where both collection and storage space will be provided

Retail projects must conduct a waste stream audit for the once a year for the project in an existing or rented location or make projections based on the previous year’s data for their business. Identify the top-four recyclable waste streams while stating the top-three waste streams where both collection and storage space will be provided

QUESTION 14
In order to achieve Indoor Environmental Quality Credit, Quality Views the project team increased the window-to-wall ratio. Which prerequisite was impacted by this action?

Energy and Atmosphere Prerequisite, Minimum Energy Performance

Energy and Atmosphere Prerequisite, Building-Level Energy Metering

Energy and Atmosphere Prerequisite, Fundamental Refrigerant Management

Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification

Explanation
The correct answer isA. Energy and Atmosphere Prerequisite, Minimum Energy Performance. This is because:
* Increasing the window-to-wall ratio (WWR) would reduce the solar heat gain and the cooling load of the building, which are two of the main factors that affect the energy performance of a building12.
* The WWR is defined as the ratio of the area of windows to the area of external walls in a building3.The
* higher the WWR, the more natural light and ventilation can be achieved, which can improve the indoor environmental quality (IEQ) and reduce the need for artificial lighting and mechanical systems4.
* The LEED AP BD+C V4 credit for IEQ requires that buildings have a minimum WWR of 15% for south-facing walls and 20% for north-facing walls5.However, this minimum WWR may not be sufficient to achieve optimal IEQ in hot regions, where high solar radiation and humidity levels create high cooling demand6. Therefore, increasing the WWR beyond these minimum values can help achieve better IEQ by reducing both solar heat gain and cooling load.
* The other prerequisites are not impacted by increasing the WWR.Building-level energy metering is a prerequisite that requires measuring and reporting energy use at individual building units or zones5.Fundamental refrigerant management is a prerequisite that requires ensuring proper handling, storage, use, recovery, and disposal of refrigerants used in cooling systems5.Fundamental commissioning and verification is a prerequisite that requires ensuring that all commissioning activities are documented and verified according to LEED standards5.
References:1: Window-to-wall Ratio and Energy Efficiency: Finding the Perfect Fit2: Impact of Window to Wall Ratio on Energy Loads in Hot Regions: A Study of Building Energy Performance3: Determination of Optimum Window to External Wall Ratio for Offices in a Tropical Climate4: Parametric Optimization of Window-to-Wall Ratio for Passive Buildings in Hot Regions5: LEED v4: Building Design + Construction Guide – U.S.Green Building Council6: Effect of building shape, orientation, window to wall ratios and zones on energy efficiency and thermal comfort of naturally ventilated houses in tropical climate

QUESTION 15
Water Efficiency Prerequisite, Outdoor Water Use Reduction, Option 2. Reduced Irrigation, requires that a project’s landscape water requirement be reduced by what percentage from the calculated baseline for the project site’s peak watering month?

20%

25%

30%

40%

QUESTION 16
The intent of the Sustainable Sites Prerequisite, Construction Activity Pollution Prevention is to

control erosion, noxious odors and landfill waste

control erosion, landfill waste and excessive noise

control erosion, waterway sedimentation and airborne dust

control erosion, waterway sedimentation and noxious odors

QUESTION 17
Location and Transportation Credit, Surrounding Density and Diverse Uses, Option 1. Surrounding Density requires project teams to exclude what type of land area from the calculations?

Buildable land within 1/4 mi. (0.40 km) of the project boundary

Public right-of-way areas within 1/4 mi. (0.40 km) of the project boundary

Surface parking areas within 1/2 mi. (0.80 km) of the project boundary

University campus land areas within 1/2 mi. (0.80 km) of the project boundary

QUESTION 18
Plug-in task lighting will be utilized in a LEED project at all workstations. The task lighting is not included in the installed lighting power calculations for Energy and Atmosphere Prerequisite, Minimum Energy Performance since

it is being covered by Indoor Environmental Quality Credit, Interior Lighting, Option 1. Lighting Control

it is specifically exempted by ASHRAE

it will be installed by the owner

the lamp wattage has not been determined

QUESTION 19
Which of the following must be included in the Sustainable Sites Credit, Site Assessment?

A targeted Brownfield remedy plan

Historic preservation plan to include neighboring properties

Proximity of vulnerable populations to major sources of air pollution

The surrounding density within a 1/4 mi. (0.40 km) radius of the project boundary

QUESTION 20
Which of the following features is commonly included in a building’s leak-detection system to enhance water efficiency?

Real-time monitoring and alerts

Water-use prediction algorithms based on weather data

Monthly water-use analysis reports

QUESTION 21
A developer is considering an urban infill site for a new commercial building rather than a rural greenfield site adjacent to a stream. Which of the following is an economic advantage of the infill site?

Protects greenfields and farmland

Preserves habitat and natural resources

Reduces need for new utility infrastructure

Reduces potential damage to an existing stream

QUESTION 22
Which of the following mandatory recyclable materials is required by MRp1: Planning for Zero Waste Operations for storage and collection?

Textiles

Ceramics

Corrugated cardboard

QUESTION 23
Which of the following products must always be included in Materials and Resources credits?

Faucets

Fire suppression system

Interior Paint

Furniture

QUESTION 24
Which of the following plumbing fixtures apply to the calculations in Water Efficiency Prerequisite, Indoor Water Use Reduction?

Toilets, urinals, pre-rinse spray valves

Toilets, private lavatory faucets, dishwashers

Urinals, public lavatory faucets, kitchen sink faucets

Urinals, showerheads, commercial kitchen filling operations faucets

QUESTION 25
A design team is working on a hospital project. In order to meet the Energy and Atmosphere Prerequisite, Minimum Energy Performance, what option is used?

Whole building simulation

EPA target finder rating tool

Green-e Energy

Advanced building core performance guide

QUESTION 26
Which principal areas must the LEED AP focus on to attain the Integrative Process Credit, Integrative Process?

Materials and resources

Location and site selection

Regional priority and innovation

Energy and water related systems

QUESTION 27
Which of the following strategies reflects a synergy between EQc2: Occupant Experience, Option 5. Lighting Environment and Energy and Atmosphere credits?

Design open spaces to support community interaction and connectivity while preserving natural site topography and ecological balance

Introduce light pipes into enclosed areas that do not have direct exposure to the exterior

Use double-glazed windows to improve thermal comfort while ensuring uniform temperature distribution

QUESTION 28
Which of the following is a leadership extraction practice that rewards projects for choosing materials with closed-loop recycling and take-back programs in LEED?

Material reuse

Bio-based elements

Extended producer responsibility

Forest Stewardship Council (FSC) wood products

QUESTION 29
What Color Rendering Index (CRI) value meets the requirements of Indoor Environmental Quality Credit, Interior Lighting?

45

85

25

65

QUESTION 30
A project team is providing additional ventilation under Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies. What credit could this adversely affect?

Energy and Enhanced Commissioning

Indoor Environmental Quality, Thermal Comfort

Energy and Atmosphere, Optimize Energy Performance

Indoor Environmental Quality, Interior Lighting

QUESTION 31
In order to achieve the requirements of LEED, the Electrical Vehicle Supply Equipment (EVSE) must comply with:

State, but not regional standards established for electrical vehicles operated within the state of vehicle operation

Regional, state, or local standards for the electrical connectors to be used

Level 1 charging capacity (110 volts AC)

Manufacturer’s standards established for electrical vehicles operated within the state of vehicle primary operation

QUESTION 32
In the calculations for Water Efficiency Credit, Outdoor Water Use Reduction, food gardens

must be calculated using at least 20% from an alternative water source

must be calculated using 100% potable water

may be included or excluded from the calculations

may be calculated using a standard 20% reduction from baseline

QUESTION 33
For a task chair purchased for a healthcare facility, which portion of the product contributes toward Materials and Resources Credit, Furniture and Medical Furnishings?

Wheels, 4% of product by weight, that do not contain lead, mercury, cadmium or antimony

Fabric, 5% of product by weight, with stain resistant treatment containing Perfluorinated Compounds (PFCs)

Metal base, 20% of product by weight, which do not contain heavy metals and is not plated with hexavalent chromium

Plastic armrests, 30% of product by weight, with added antimicrobial treatment

QUESTION 34
In the calculations for Water Efficiency Credit, Outdoor Water Use Reduction, food gardens

must be calculated using at least 20% from an alternative water source

must be calculated using 100% potable water

may be included or excluded from the calculations

may be calculated using a standard 20% reduction from baseline

Free certification test prep

LEED-AP-BD-C Practice Exam and Study Guides – Verified By PDF4Test Updated 407 Questions [Q13-Q34]

Leave a Reply Cancel reply